User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            OSP-4L Displacemet Sub
DATE:                  07-Nov-97
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       29
NUMBER OF LINES:       312
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         {* Displacement Calibration *}
  1.004  HEAD         {  Channel 1 }
  1.005  JMP          2.001
  1.006  EVAL
  2.001  DISP         Set the UUT as follows:
  2.001  DISP         ACC/DISP ........................... DISP ALL
  2.001  DISP         SERVO .............................. ON
  2.002  DISP         Adjust the CROSSOVER controls for channel 1
  2.002  DISP         to be active.  Adjust the channel 1 vernier for 10.00.
  2.003  IEEE         [@1281][D1000]RDG?[I]
  2.004  ACC    2     .3610V         80P% 10P/
  2.005  MEME
  2.006  MEMC         V              2.00%         .1inp-p
#!          Test Tol 0.00722, Sys Tol 4.888e-005, TUR 147.709 (>= 4.00).
  3.001  IEEE         [@1281]ACV AUTO,FILT1HZ
  3.002  DISP         Set the UUT as follows:
  3.002  DISP         LEVEL MULTIPLIERS................... Both In
  3.002  DISP         SERVO .............................. ON
  3.003  DISP         Change the UUT frequency output to 5 Hz.
  3.003  DISP
  3.003  DISP         It may be necessary to adjust the CROSSOVER
  3.003  DISP         to keep channel 1 active.
  3.004  IEEE         [@1281]RDG?[T0][I]
  3.005  ACC    0.2   .0903V         220P% 70P/
  3.006  MEME
  3.007  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.001806, Sys Tol 3.3866e-005, TUR 53.328 (>= 4.00).
  4.001  IEEE         [@1281]ACV AUTO,FILT10HZ
  4.002  DISP         Change the UUT frequency output to 10 Hz.
  4.002  DISP
  4.002  DISP         It may be necessary to adjust the CROSSOVER
  4.002  DISP         to keep channel 1 active.
  4.003  IEEE         [@1281]RDG?[T0][I]
  4.004  ACC    2     .3610V         220P% 70P/
  4.005  MEME
  4.006  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.00722, Sys Tol 0.00021942, TUR 32.905 (>= 4.00).
  5.001  IEEE         [@1281]ACV AUTO,FILT10HZ
  5.002  DISP         Set the UUT as follows:
  5.002  DISP         LEVEL MULTIPLIERS................... X100 (1in p-p)
  5.002  DISP         SERVO .............................. ON
  5.003  DISP         Change the UUT frequency output to 20 Hz.
  5.003  DISP
  5.003  DISP         It may be necessary to adjust the CROSSOVER
  5.003  DISP         to keep channel 1 active.
  5.004  IEEE         [@1281]RDG?[T0][I]
  5.005  ACC    2     .1440V         170P% 10P/
  5.006  MEME
  5.007  MEMC         V              3.0%          1inp-p
#! WARNING: Test Tol 0.00288, Sys Tol 0.24482, TUR 0.012 (<  4.00).
  6.001  IEEE         [@1281]ACV AUTO,FILT40HZ
  6.002  DISP         Set the UUT as follows:
  6.002  DISP         LEVEL MULTIPLIERS................... X10 (.1in p-p)
  6.002  DISP         SERVO .............................. ON
  6.003  DISP         Change the UUT frequency output to 50 Hz.
  6.003  DISP
  6.003  DISP         It may be necessary to adjust the CROSSOVER
  6.003  DISP         to keep channel 1 active.
  6.004  IEEE         [@1281]RDG?[T0][I]
  6.005  ACC    0.2   .0903V         200P% 20P/
  6.006  MEME
  6.007  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.001806, Sys Tol 2.206e-005, TUR 81.868 (>= 4.00).
  7.001  IEEE         [@1281]ACV AUTO,FILT100HZ
  7.002  DISP         Set the UUT as follows:
  7.002  DISP         LEVEL MULTIPLIERS................... Both Out (.01in)
  7.002  DISP         SERVO .............................. ON
  7.003  DISP         Change the UUT frequency output to 500 Hz.
  7.003  DISP
  7.003  DISP         It may be necessary to adjust the CROSSOVER
  7.003  DISP         to keep channel 1 active.
  7.004  IEEE         [@1281][D2000]RDG?[I]
  7.005  ACC    2     .9030V         130P% 10P/
  7.006  MEME
  7.007  MEMC         V              3.0%          .01inp-p
#!          Test Tol 0.01806, Sys Tol 0.00013739, TUR 131.451 (>= 4.00).
  8.001  HEAD         {  Channel 2  }
  8.002  JMP          9.001
  8.003  EVAL
  9.001  DISP         Adjust the oscillator controlls for a 100Hz output.
  9.002  DISP         Adjust the CROSSOVER controls for channel 2
  9.002  DISP         to be active.  Adjust the channel 2 vernier for 10.00.
  9.003  IEEE         [@1281][D1000]RDG?[I]
  9.004  ACC    2     .3610V         130P% 10P/
  9.005  MEME
  9.006  MEMC         V              2.00%         .1inp-p
#!          Test Tol 0.00722, Sys Tol 6.693e-005, TUR 107.874 (>= 4.00).
 10.001  IEEE         [@1281]ACV AUTO,FILT1HZ
 10.002  DISP         Set the UUT as follows:
 10.002  DISP         LEVEL MULTIPLIERS................... Both In
 10.002  DISP         SERVO .............................. ON
 10.003  DISP         Change the UUT frequency output to 5 Hz.
 10.003  DISP
 10.003  DISP         It may be necessary to adjust the CROSSOVER
 10.003  DISP         to keep channel 2 active.
 10.004  IEEE         [@1281]RDG?[T0][I]
 10.005  ACC    0.2   .0903V         220P% 70P/
 10.006  MEME
 10.007  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.001806, Sys Tol 3.3866e-005, TUR 53.328 (>= 4.00).
 11.001  IEEE         [@1281]ACV AUTO,FILT10HZ
 11.002  DISP         Change the UUT frequency output to 10 Hz.
 11.002  DISP
 11.002  DISP         It may be necessary to adjust the CROSSOVER
 11.002  DISP         to keep channel 2 active.
 11.003  IEEE         [@1281]RDG?[T0][I]
 11.004  ACC    2     .3610V         170P% 60P/
 11.005  MEME
 11.006  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.00722, Sys Tol 0.00018137, TUR 39.808 (>= 4.00).
 12.001  DISP         Set the UUT as follows:
 12.001  DISP         LEVEL MULTIPLIERS................... X100 (1in p-p)
 12.001  DISP         SERVO .............................. ON
 12.002  DISP         Change the UUT frequency output to 20 Hz.
 12.002  DISP
 12.002  DISP         It may be necessary to adjust the CROSSOVER
 12.002  DISP         to keep channel 2 active.
 12.003  IEEE         [@1281]RDG?[T0][I]
 12.004  ACC    2     .1440V         170P% 10P/
 12.005  MEME
 12.006  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.00288, Sys Tol 4.448e-005, TUR 64.748 (>= 4.00).
 13.001  IEEE         [@1281]ACV AUTO,FILT40HZ
 13.002  DISP         Set the UUT as follows:
 13.002  DISP         LEVEL MULTIPLIERS................... X10 (.1in p-p)
 13.002  DISP         SERVO .............................. ON
 13.003  DISP         Change the UUT frequency output to 50 Hz.
 13.003  DISP
 13.003  DISP         It may be necessary to adjust the CROSSOVER
 13.003  DISP         to keep channel 2 active.
 13.004  IEEE         [@1281]RDG?[T0][I]
 13.005  ACC    0.2   .0903V         150P% 10P/
 13.006  MEME
 13.007  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.001806, Sys Tol 1.5545e-005, TUR 116.179 (>= 4.00).
 14.001  IEEE         [@1281]ACV AUTO,FILT100HZ
 14.002  DISP         Set the UUT as follows:
 14.002  DISP         LEVEL MULTIPLIERS................... Both Out (.01in)
 14.002  DISP         SERVO .............................. ON
 14.003  DISP         Change the UUT frequency output to 500 Hz.
 14.003  DISP
 14.003  DISP         It may be necessary to adjust the CROSSOVER
 14.003  DISP         to keep channel 2 active.
 14.004  IEEE         [@1281][D2000]RDG?[I]
 14.005  ACC    2     .9030V         130P% 10P/
 14.006  MEME
 14.007  MEMC         V              3.0%          .01inp-p
#!          Test Tol 0.01806, Sys Tol 0.00013739, TUR 131.451 (>= 4.00).
 15.001  HEAD         {  Channel 3 }
 15.002  JMP          16.001
 15.003  EVAL
 16.001  DISP         Adjust the oscillator controlls for a 100Hz output.
 16.002  DISP         Adjust the CROSSOVER controls for channel 3
 16.002  DISP         to be active.  Adjust the channel 3 vernier for 10.00.
 16.003  IEEE         [@1281][D1000]RDG?[I]
 16.004  ACC    2     .3610V         130P% 10P/
 16.005  MEME
 16.006  MEMC         V              2.00%         .1inp-p
#!          Test Tol 0.00722, Sys Tol 6.693e-005, TUR 107.874 (>= 4.00).
 17.001  IEEE         [@1281]ACV AUTO,FILT1HZ
 17.002  DISP         Set the UUT as follows:
 17.002  DISP         LEVEL MULTIPLIERS................... Both In
 17.002  DISP         SERVO .............................. ON
 17.003  DISP         Change the UUT frequency output to 5 Hz.
 17.003  DISP
 17.003  DISP         It may be necessary to adjust the CROSSOVER
 17.003  DISP         to keep channel 3 active.
 17.004  IEEE         [@1281]RDG?[T0][I]
 17.005  ACC    0.2   .0903V         220P% 70P/
 17.006  MEME
 17.007  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.001806, Sys Tol 3.3866e-005, TUR 53.328 (>= 4.00).
 18.001  IEEE         [@1281]ACV AUTO,FILT10HZ
 18.002  DISP         Change the UUT frequency output to 10 Hz.
 18.002  DISP
 18.002  DISP         It may be necessary to adjust the CROSSOVER
 18.002  DISP         to keep channel 3 active.
 18.003  IEEE         [@1281]RDG?[T0][I]
 18.004  ACC    2     .3610V         170P% 60P/
 18.005  MEME
 18.006  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.00722, Sys Tol 0.00018137, TUR 39.808 (>= 4.00).
 19.001  DISP         Set the UUT as follows:
 19.001  DISP         LEVEL MULTIPLIERS................... X100 (1in p-p)
 19.001  DISP         SERVO .............................. ON
 19.002  DISP         Change the UUT frequency output to 20 Hz.
 19.002  DISP
 19.002  DISP         It may be necessary to adjust the CROSSOVER
 19.002  DISP         to keep channel 3 active.
 19.003  IEEE         [@1281]RDG?[T0][I]
 19.004  ACC    2     .1440V         170P% 10P/
 19.005  MEME
 19.006  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.00288, Sys Tol 4.448e-005, TUR 64.748 (>= 4.00).
 20.001  IEEE         [@1281]ACV AUTO,FILT40HZ
 20.002  DISP         Set the UUT as follows:
 20.002  DISP         LEVEL MULTIPLIERS................... X10 (.1in p-p)
 20.002  DISP         SERVO .............................. ON
 20.003  DISP         Change the UUT frequency output to 50 Hz.
 20.003  DISP
 20.003  DISP         It may be necessary to adjust the CROSSOVER
 20.003  DISP         to keep channel 3 active.
 20.004  IEEE         [@1281]RDG?[T0][I]
 20.005  ACC    0.2   .0903V         150P% 10P/
 20.006  MEME
 20.007  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.001806, Sys Tol 1.5545e-005, TUR 116.179 (>= 4.00).
 21.001  IEEE         [@1281]ACV AUTO,FILT100HZ
 21.002  DISP         Set the UUT as follows:
 21.002  DISP         LEVEL MULTIPLIERS................... Both Out (.01in)
 21.002  DISP         SERVO .............................. ON
 21.003  DISP         Change the UUT frequency output to 500 Hz.
 21.003  DISP
 21.003  DISP         It may be necessary to adjust the CROSSOVER
 21.003  DISP         to keep channel 3 active.
 21.004  IEEE         [@1281][D1000]RDG?[I]
 21.005  ACC    2     .9030V         130P% 10P/
 21.006  MEME
 21.007  MEMC         V              3.0%          .01inp-p
#!          Test Tol 0.01806, Sys Tol 0.00013739, TUR 131.451 (>= 4.00).
 22.001  HEAD         {  Channel 4 }
 22.002  JMP          23.001
 22.003  EVAL
 23.001  DISP         Adjust the oscillator controlls for a 100Hz output.
 23.002  DISP         Adjust the CROSSOVER controls for channel 4
 23.002  DISP         to be active.  Adjust the channel 4 vernier for 10.00.
 23.003  IEEE         [@1281][D2000]RDG?[I]
 23.004  ACC    2     .3610V         130P% 10P/
 23.005  MEME
 23.006  MEMC         V              2.00%         .1inp-p
#!          Test Tol 0.00722, Sys Tol 6.693e-005, TUR 107.874 (>= 4.00).
 24.001  IEEE         [@1281]ACV AUTO,FILT1HZ
 24.002  DISP         Set the UUT as follows:
 24.002  DISP         LEVEL MULTIPLIERS................... Both In
 24.002  DISP         SERVO .............................. ON
 24.003  DISP         Change the UUT frequency output to 5 Hz.
 24.003  DISP
 24.003  DISP         It may be necessary to adjust the CROSSOVER
 24.003  DISP         to keep channel 4 active.
 24.004  IEEE         [@1281]RDG?[T0][I]
 24.005  ACC    0.2   .0903V         220P% 70P/
 24.006  MEME
 24.007  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.001806, Sys Tol 3.3866e-005, TUR 53.328 (>= 4.00).
 25.001  IEEE         [@1281]ACV AUTO,FILT10HZ
 25.002  DISP         Change the UUT frequency output to 10 Hz.
 25.002  DISP
 25.002  DISP         It may be necessary to adjust the CROSSOVER
 25.002  DISP         to keep channel 4 active.
 25.003  IEEE         [@1281]RDG?[T0][I]
 25.004  ACC    2     .3610V         170P% 60P/
 25.005  MEME
 25.006  MEMC         V              3.0%          10inp-p
#!          Test Tol 0.00722, Sys Tol 0.00018137, TUR 39.808 (>= 4.00).
 26.001  DISP         Set the UUT as follows:
 26.001  DISP         LEVEL MULTIPLIERS................... X100 (1in p-p)
 26.001  DISP         SERVO .............................. ON
 26.002  DISP         Change the UUT frequency output to 20 Hz.
 26.002  DISP
 26.002  DISP         It may be necessary to adjust the CROSSOVER
 26.002  DISP         to keep channel 4 active.
 26.003  IEEE         [@1281]RDG?[T0][I]
 26.004  ACC    2     .1440V         170P% 10P/
 26.005  MEME
 26.006  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.00288, Sys Tol 4.448e-005, TUR 64.748 (>= 4.00).
 27.001  IEEE         [@1281]ACV AUTO,FILT40HZ
 27.002  DISP         Set the UUT as follows:
 27.002  DISP         LEVEL MULTIPLIERS................... X10 (.1in p-p)
 27.002  DISP         SERVO .............................. ON
 27.003  DISP         Change the UUT frequency output to 50 Hz.
 27.003  DISP
 27.003  DISP         It may be necessary to adjust the CROSSOVER
 27.003  DISP         to keep channel 4 active.
 27.004  IEEE         [@1281]RDG?[T0][I]
 27.005  ACC    0.2   .0903V         150P% 10P/
 27.006  MEME
 27.007  MEMC         V              3.0%          1inp-p
#!          Test Tol 0.001806, Sys Tol 1.5545e-005, TUR 116.179 (>= 4.00).
 28.001  IEEE         [@1281]ACV AUTO,FILT100HZ
 28.002  DISP         Set the UUT as follows:
 28.002  DISP         LEVEL MULTIPLIERS................... Both Out (.01in)
 28.002  DISP         SERVO .............................. ON
 28.003  DISP         Change the UUT frequency output to 500 Hz.
 28.003  DISP
 28.003  DISP         It may be necessary to adjust the CROSSOVER
 28.003  DISP         to keep channel 4 active.
 28.004  IEEE         [@1281][D2000]RDG?[I]
 28.005  ACC    2     .9030V         130P% 10P/
 28.006  MEME
 28.007  MEMC         V              3.0%          .01inp-p
#!          Test Tol 0.01806, Sys Tol 0.00013739, TUR 131.451 (>= 4.00).
 29.001  END
#! T.U.R.s less than 4.00:                  1
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.